Win98 vm for windows 10
#Win98 vm for windows 10 driver
This will put on the SVGA and network driver and allow drag and drop between the host and the VM. On boot you should now be able to run the VMTools manually. The workaround for this is to power down the VM, add another CD drive which uses the Winpre2k.iso in Program Files\VMware\VMware Workstation.
#Win98 vm for windows 10 install
To install VMTools under Windows 98 I was presented with the ISO being mounted as an audio CD. This will happen about 30 times and it is important to install the driver and not click cancel each time.Īfter a series of reboots and possibly unknown devices you should have an intact Windows 98 virtualised PC. You may see a PCI-to-PCI bridge device being detected over and over again. Once it boots it will start to go through the process of detecting devices. Power up the 98 VM and voila you should see the 98 boot screen. To set up the virtual machine to play sound, see Configuring Sound in the GSX Server documentation. Run winimage and restore the VHD file choosing the 4GB IDE disk. Enabling Sound in a Windows 98 Guest VMware GSX Server: The sound device is disabled by default and must be enabled with the virtual machine settings editor (VM > Settings) after the operating system has been installed. When it boots it will not show up as a drive letter – dont worry. Add the blank 4GB vmdk disk file which was created for the 98 VM. With the XP VM powered off (this needs to be a fully functioning copy of XP with winimage installed and access to the VHD backup file).
The trick here is to first create the 4GB vmdk as an IDE disk by selecting Windows 98 as the VM OS first.ĭon’t power the 98 VM on. One configured with XP which could be used to write the VHD image back to a 4GB vmdk and one configured for Windows 98 with a 4GB IDE vmdk which would ultimately be the virtualised machine. This produced a VHD file which also meant the MBR would be intact so it could be booted easily. To start I mounted the hard disk on my laptop and used Winimage to create an image of the aging 4GB HDD. Works nice and fast: If you need any help to set up your Win98 virtual machine, do not hesitate to ask.
Here for instance my Windows ME virtual machine running in VMware Player, with true 32-bit colors and fully integrated to my Windows 7 host. To carry out the task I used the following: VMware Player has integration support also for pre Windows 2000 systems. This was successful and the challenge was on. As Windows 98 uses fat32 there would be no issue reading the disk. This allowed me to mount the hard disk on my laptop to check whether the data was there. To do this, I bought a SATA/IDE to USB 2.0 hard disk adapter from ebay for £15. Not an easy challenge as Windows 98 is not supported by VMWare converter. Instead of searching ebay for a second hand power supply, I took up the challenge of Virtualising the PC. On inspection, it looked like a dead power supply.
#Win98 vm for windows 10 Pc
My fathers 10 year old Windows 98 PC gave up the ghost a couple of weeks back. Virtualising a Windows 98 PC using VMWare Workstation 6.5 FebruPosted by anotherlostsoul in Technology.